Your current location：Technique lecture The rotor allows unbalance calculation.
How to select the balance machine:
Auto motor company how to choose automatic balance correction machine?
With the increase of domestic automobile production, the motor output of automobile is increasing rapidly, such as oil pump, wiper, window motor and so on. Rotor type is more, suit to use my company's two worktables automatic balancing machine, cost-effective, simple and convenient replacing varieties, skilled employees as long as 10 minutes can complete HuanXing namely.
Soybean milk machine, juicer enterprises how to choose automatic balance correction machine?
Due to the high speed of the motor, the residual unbalance of the rotor is small, the output is large, and the equipment accuracy and production efficiency are high. Soybean milk machine and juicer enterprises are very suitable for the five (6) automatic balancing machines manufactured by our company.
How does the vacuum cleaner industry choose fully automatic balance correction machine?
China is a big producer of dust collectors, accounting for 80 percent of the world's production. Vacuum cleaner rotor type is relatively small, the production volume is large, so the choice balance machine demands attention to the equipment stability, the production efficiency is high. Aiming at the characteristics of vacuum cleaner production, the company has introduced the four-position impeller balancing machine with the assembly line and the five-position full-automatic rotor balancing machine. The working time of the four stations is 1-1.5 seconds, and the working time of the five stations is 6-8 seconds. The two devices can be connected to the automatic production line by themselves.
How to choose the automatic balance correction machine?
The rotor technology of domestic electric tools is general, the initial rough measurement of the rotor is large, and the residual unevenness is high. Indiana company fully automatic balancing machine is very suitable for domestic electric tools enterprise process characteristics, the original motor rotor unbalance requirement is lower than foreign products, at the same time has a mechanical mechanism design is reasonable, stable and reliable, good durability, easy maintenance, low maintenance cost advantages. Due to the rotor of the electric tool industry type is more, suit to use emperor two worktables automatic balancing machine, cost-effective, simple and convenient replacing varieties, skilled employees as long as 10 minutes can complete HuanXing namely.
Optional knife type
R type milling:
External arc milling. It is mainly used in electric tools, household appliances and auto parts (rain scraping motor), etc.
V type milling:
V groove milling. Mainly used in auto parts (fuel pump, rain scraping, glass lift motor, etc.);
T milling:
It is mainly used in series 3, 5, 7 series dc motor rotor, motor rotor, motor rotor, etc.
Drilling and milling:
Automobile motor (generator rotor), pump impeller (shielded pump rotor), cutting by drilling and milling;
The rotor balance level should be determined before calculating allowable unbalance.
G100-6 cylinder and multi-cylinder tell the crankshaft transmission of diesel engine; An engine for cars, vans, and locomotives.
The G40- car wheels, wheel drive, wheel body, drive shaft, flexible installation of six cylinders and multi - cylinder tells the four stroke engine crankshaft drive.
G16- drive shaft of special requirements (propeller, universal joint drive shaft); Parts of the grinder; Agricultural machinery parts; Individual parts of a car engine; Special requirements of the six - cylinder and multi - cylinder engine crankshaft drive.
G6.3- the gears of merchant ships and Helen's main turbine; Drum wheel of high speed separator; Fan; Rotor parts of aviation gas turbine; Impeller of pump; Machine tools and general mechanical parts.
G2.5- ordinary motor rotor; Special requirements for engines and individual parts.
G2.5- gas and steam turbines; Machine tool driver; Special requirements of neutral and large motor rotor, small motor rotor; Turbine pump
G1- drive parts for tape recorder and record player, CD and DVD; Grinding machine driver; Small armature for special requirements.
Main shaft of G0.4- precision grinding machine; Motor rotor; gyroscope
Auto motor company how to choose automatic balance correction machine?
With the increase of domestic automobile production, the motor output of automobile is increasing rapidly, such as oil pump, wiper, window motor and so on. Rotor type is more, suit to use my company's two worktables automatic balancing machine, cost-effective, simple and convenient replacing varieties, skilled employees as long as 10 minutes can complete HuanXing namely.
Soybean milk machine, juicer enterprises how to choose automatic balance correction machine?
Due to the high speed of the motor, the residual unbalance of the rotor is small, the output is large, and the equipment accuracy and production efficiency are high. Soybean milk machine and juicer enterprises are very suitable for the five (6) automatic balancing machines manufactured by our company.
How does the vacuum cleaner industry choose fully automatic balance correction machine?
China is a big producer of dust collectors, accounting for 80 percent of the world's production. Vacuum cleaner rotor type is relatively small, the production volume is large, so the choice balance machine demands attention to the equipment stability, the production efficiency is high. Aiming at the characteristics of vacuum cleaner production, the company has introduced the four-position impeller balancing machine with the assembly line and the five-position full-automatic rotor balancing machine. The working time of the four stations is 1-1.5 seconds, and the working time of the five stations is 6-8 seconds. The two devices can be connected to the automatic production line by themselves.
How to choose the automatic balance correction machine?
The rotor technology of domestic electric tools is general, the initial rough measurement of the rotor is large, and the residual unevenness is high. Indiana company fully automatic balancing machine is very suitable for domestic electric tools enterprise process characteristics, the original motor rotor unbalance requirement is lower than foreign products, at the same time has a mechanical mechanism design is reasonable, stable and reliable, good durability, easy maintenance, low maintenance cost advantages. Due to the rotor of the electric tool industry type is more, suit to use emperor two worktables automatic balancing machine, cost-effective, simple and convenient replacing varieties, skilled employees as long as 10 minutes can complete HuanXing namely.
Optional knife type
R type milling:
External arc milling. It is mainly used in electric tools, household appliances and auto parts (rain scraping motor), etc.
V type milling:
V groove milling. Mainly used in auto parts (fuel pump, rain scraping, glass lift motor, etc.);
T milling:
It is mainly used in series 3, 5, 7 series dc motor rotor, motor rotor, motor rotor, etc.
Drilling and milling:
Automobile motor (generator rotor), pump impeller (shielded pump rotor), cutting by drilling and milling;
The rotor balance level should be determined before calculating allowable unbalance.
G100-6 cylinder and multi-cylinder tell the crankshaft transmission of diesel engine; An engine for cars, vans, and locomotives.
The G40- car wheels, wheel drive, wheel body, drive shaft, flexible installation of six cylinders and multi - cylinder tells the four stroke engine crankshaft drive.
G16- drive shaft of special requirements (propeller, universal joint drive shaft); Parts of the grinder; Agricultural machinery parts; Individual parts of a car engine; Special requirements of the six - cylinder and multi - cylinder engine crankshaft drive.
G6.3- the gears of merchant ships and Helen's main turbine; Drum wheel of high speed separator; Fan; Rotor parts of aviation gas turbine; Impeller of pump; Machine tools and general mechanical parts.
G2.5- ordinary motor rotor; Special requirements for engines and individual parts.
G2.5- gas and steam turbines; Machine tool driver; Special requirements of neutral and large motor rotor, small motor rotor; Turbine pump
G1- drive parts for tape recorder and record player, CD and DVD; Grinding machine driver; Small armature for special requirements.
Main shaft of G0.4- precision grinding machine; Motor rotor; gyroscope
